DETAILED SPECS
​​​​​​MicroMolder Evo
- 34.5" x 10" x 10" (876.3mm x 254mm x 254mm)
- 90 lbs (41 Kg)
MicroMolder+
- 43" x 12" x 12" (1092mm x 305mm x 305mm)
- 125 lbs (57 Kg)
MicroMolder Evo
- 120 VAC 60 Hz: US, Canada, Mexico
- 220 VAC 50 Hz: EU, Asia, Australia, etc.
- Power consumption ~ 600 watt
MicroMolder+
- 120 VAC 60 Hz: US, Canada, Mexico
- 220 VAC 50 Hz: EU, Asia, Australia, etc.
- Power consumption ~ 850 watt
MicroMolder Evo
~1.0 oz (1.81 in^3, 29.56 cm^3) into 3D printed tool
~.75 oz (1.35 in^3, 22.18 cm^3) into aluminum tool
MicroMolder+
~2.00 oz (3.61 in^3, 59.15 cm^3) into 3D printed tool
~2.00 oz (3.61 in^3, 59.15 cm^3) into aluminum tool
**Max shot size volumes calculated including runner(s) and sprue.
***Max shot size contingent on mold design, plastic flow rate and density.
MicroMolder Evo
Seating / Preload Force: ~500 lbf typical (prior to lock)
Locked Holding Force: ~4,000 lbf (mechanical lock)
MicroMolder+
Seating / Preload Force: ~3,000 lbf typical (prior to toggle lock)
Locked Holding Force (toggle): ~15,000–20,000 lbf (geometry dependent)
Note: Electro-mechanical clamp systems with mechanical lock are not directly comparable to hydraulic press tonnage ratings.
MicroMolder Evo
Platen working area: 5.75" x 5.75" (146mm x 146mm)
Platen to platen open distance: 6" (152mm)
MicroMolder+
Platen working area: 8.75" x 8.75" (222mm x 222mm)
Platen to platen open distance: 9" (223mm)
MACHINE CONTROL
MicroMolder systems are built with industrial-grade mechanical and control components designed for precision, repeatability, and long-term reliability.
All-metal mechanical construction for rigidity and durability
Servo-driven motion system for precise control of injection and clamp functions
Integrated plasticizing screw system for consistent material melting and delivery
Precision lead screw and drive components for controlled linear motion
Multi-zone heater system for stable material processing
Compact, self-contained desktop form factor
The system is designed as a fully integrated platform, combining mechanical, electrical, and control hardware into a single, cohesive machine.
MicroMolder systems feature an integrated touchscreen interface designed for direct control of all machine functions and process parameters.
7" IPS color touchscreen display
1024 × 600 resolution
The interface provides full control over:
Injection profiles (speed, timing, dwell)
Temperature settings (multi-zone PID control)
Shot size and dosing
Clamp and cycle operation
Users can save and recall tooling profiles, enabling fast setup and repeatable results across different parts and materials.
Real-time system feedback is displayed during operation, including temperature, cycle status, and process conditions.
MicroMolder systems include a range of integrated features designed to improve process control, repeatability, and operator awareness.
Optical part counting for accurate production tracking
Part detection and jam/error monitoring with automatic cycle response
Automatic sleep and shutdown modes for safety and energy efficiency
Hopper / infeed level detection to prevent dry runs
Automatic production mode for repeatable cycling
Saved tooling profiles for quick setup and consistent results across jobs
Injection profile control with adjustable speed, ramping, timing, and dwell
Clamp and injection force monitoring via real-time feedback
Multi-zone PID temperature control managed in firmware
Integrated safety systems, including watchdog monitoring and E-stop support
These features work together to provide a controlled, repeatable injection molding process in a compact desktop platform.
MISCELLANEOUS
MicroMolder systems incorporate multiple layers of safety, combining hardware protection with firmware-level monitoring.
Automatic safety shutdown during unattended operation or fault conditions
Watchdog monitoring to detect and respond to abnormal system behavior
Over-temperature protection with automatic heater shutdown
Fused overcurrent protection for electrical safety
Guarding with open-door sensing to prevent operation when access panels are open
External emergency stop (E-stop)Â support for immediate system shutdown
These systems are designed to provide safe operation in both attended and semi-attended environments while maintaining reliable process control.
MicroMolder systems are designed for easy maintenance, flexible tooling integration, and expandability, allowing users to service key components and adapt the machine to different applications.
Serviceable Components
Removable / replaceable nozzles for different materials and maintenance
Removable injection screw for cleaning, inspection, and replacement
Tooling Compatibility
Compatible with 3D printed and aluminum tooling
Optional Accessories
Anti-drool nozzle for improved material control and reduced stringing
MUD (Multi-Use Die) box kits for modular tooling setups and faster tool changes
External mold temperature control kit (24VDC heater + Type-K thermocouple)
These features allow users to maintain the system in-house while supporting a wide range of tooling configurations and process setups.